Altronix Power Device

The Altronix ALTV615DC8UL Power Supply is designed with eight (8) individual class 2-rated, fuse or PTC protected, power limited outputs for powering CCTV Cameras and other video accessories. It has a 6VDC-15VDC adjustable output. ALTV615DC8UL Power Supply has a 4 amp continuous supply current. It has filtered and electronically regulated outputs. Other features include power ON/OFF switch, AC input and DC output LEDs, and spare fuses (fuse protected model only).

The Altronix WPTV244175UL Power Supply provides power via four (4) protected outputs for CCTV Cameras, heaters and other video accessories. It has one (1) fuse protected non-power limited output. The other three (3) are Class 2 Rated PTC protected power limited outputs rated @ 2.5 amp. WPTV244175UL Power Supply has NEMA 4 Rated enclosure for outdoor use and an illuminated power disconnect circuit breaker with manual reset.

Model AL802ULADA is an extremely cost effective 8 amp voltage regulated remote power supply/battery charger. It may be connected to any 12 or 24 volt Fire Alarm Control Panel (FACP). Primary applications include Notification Appliance Circuit (NAC such as strobes and horns) expansion support to meet ADA requirements. It also provides auxiliary power to support system accessories. The unit delivers regulated and filtered 24 or 12 volt power to Class B or Class A NAC loop circuits. Additionally, a separate 1.0A auxiliary output with reset for four (4) wire smoke detectors is available. The 8 amp rated supply current can be divided between the four (4) outputs for powering NAC devices. Each output is rated at 2.5 amp max., and can be independently programmed for Steady, Temporal Code 3 or Strobe Synchronization.

The PD4UL is a UL Recognized component power distribution module, designed to convert a single AC or DC intput into four (4) individually fuse protected outputs.

Model SMP10PM12P16 power supply/charger converts a 115 VAC 50/60Hz input, to a 12VDC @ 10 amp of continuous supply current distributed via sixteen (16) fuse protected outputs.

Model SMP3PMP4 power supply/charger converts a 115 VAC 50/60Hz input, to a 12VDC or 24VDC @ 2.5 amp of continuous supply current distributed via four (4) fuse protected outputs.

This dual channel unit is designed to provide 24VDC power for a maximum of two electrified panic devices with very high inrush requirements. Each channel has an adjustable relock delay input that will control a pair of doors simultaneously or independent control of two single doors. Unit has two sets of relays per channel which can be configured to trigger external relays, automatic door openers, ADA push plate switches etc. Unit can control automatic door operators where the doors are always locked or where the doors are unlocked during the business day.

HubWay Video Balun/Combiner to be used with any HubWay and HubSat UTP Transceiver Hub routes Video/Data and Power from the Altronix HubWay or HubSat units for either fixed or PTZ cameras.

4PT FIB MED CONV/2SFP/Bluetooth/NEMA4