X
Product was successfully added to your shopping cart.

Continue Shopping

Bosch Fire & Intrusion Detector

1 to 10 of 48 Total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. Bosch DS1100i Fire & Intrusion Detector
    Part #: DS1101I | SKU: BOS18106

    MSRP: $59.10 Price: $44.69
    In Stock
  2. Bosch Fire & Intrusion Detector
    Part #: COBREFLEX IIB | SKU: BOS605531

    Folded sectoral horn to match ID60 drivers, also fits 1828, 1829, 7110XC, and ID30 drivers, 80 x 60, weather resistant, integral mounting bracket, gray
    MSRP: $226.00 Price: $188.33
    In Stock
  3. Bosch Fire & Intrusion Detector
    Part #: D1218 | SKU: BOS605551

    BATTERY, 12V, 18 AH
    MSRP: $115.00 Price: $86.96
    In Stock
  4. Bosch Fire & Intrusion Detector
    Part #: RFPB-FP-A | SKU: BOS605571

    Fixed Panic Button
    MSRP: $142.00 Price: $107.38
    In Stock
  5. Bosch DS1100i Fire & Intrusion Detector
    Part #: DS1103I | SKU: BOS18108

    MSRP: $59.10 Price: $44.69
    In Stock
  6. Bosch DS1100i Fire & Intrusion Detector
    Part #: | SKU: model-4919

    The Bosch DS1100i uses microprocessor-based Sound Analysis Technology (SAT) to listen for the specific frequencies associated with breaking glass. The DS1100i can be used to detect breakage of plate, tempered, laminated and wired glass types. A built-in environmental test feature alerts the installer of false alarm hazards in harsh environments. A round cover design in available.
  7. Bosch D263 Fire & Intrusion Detector
    Part #: | SKU: model-4890

    The D263 Series Detector models use an infrared (IR) LED light source and a silicon photodiode to measure light in a chamber. A fine screen covers the chamber to deter insects and to reduce dust accumulation and nuisance alarms. During a fire, smoke particles reflect light onto the photodiode. When the photodiode measurements exceed the alarm threshold, the detector signals an alarm condition. After the alarm condition clears, interrupt power at the control panel to reset the detector.
  8. Bosch D273 Fire & Intrusion Detector
    Part #: | SKU: model-4891

    The D273 Series Detector models use an infrared (IR) LED light source and a silicon photodiode to measure light in a chamber. A fine screen covers the chamber to deter insects and reduce dust accumulation and nuisance alarms. During a fire, smoke particles reflect light onto the photodiode. When the photodiode measurements exceed the alarm threshold, the detector signals an alarm condition. After the alarm condition clears, interrupt power at the control panel to reset the detector. When a D132B Reversing Relay Module is used, the LED does not latch on alarm.
  9. Bosch F220-P Fire & Intrusion Detector
    Part #: | SKU: model-4923

    The Bosch F220-P Photoelectric Smoke Detector uses the light scatter technique using a pulsed infrared source operating with a gated high-speed photodiode infrared sensor and a symmetrical optical chamber that allows uniform 360-degree smoke entry while increasing immunity to external light. Head only, needs base. The F220-P detectors are UL Listed, open-area Photoelectric Smoke Detectors designed for use with commercial fire protective signaling systems and household fire warning systems (refer to NFPA 72, The National Fire Alarm Code). By utilizing low-current electronic circuitry, the F220-P detectors can be connected to a wide range of power source circuits.
  10. Bosch Fire & Intrusion Detector
    Part #: B4512-CV-920 | SKU: BOS605509

    B Series IP Panel kit with B10/CX4010/B444-V/B920
    MSRP: $859.00 Price: $649.56

1 to 10 of 48 Total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5