Public Address Equipment

Bogen's AS1 Amplified Ceiling Speaker is an 8" cone-type loudspeaker complete with built-in 1-watt amplifier and volume control. Volume control allows adjustment of the paging level at each speaker location in the system. It interfaces with a standard 600-ohm telephone line. AS1 Amplified Ceiling Speaker is available unmounted.

Bogen's ASWG1 Amplified Ceiling Speaker is an 8" cone-type loudspeaker complete with a built-in 1-watt amplifier and volume control. The volume control allows adjustment of the paging level at each speaker location in the system. It is ideal for telephone-paging systems and interfaces with a standard 600-ohm telephone line. ASWG1 Amplified Ceiling Speaker is available on a white ceiling grille with a detachable knob for volume control.

Bogen's ACD2X2 Ceiling Speaker drop-in ceiling speaker is a full-range, 1-watt, self-amplified speaker that is quick and easy to install. Simply wire it and drop it into place. It features 8" main cone speaker with finely perforated grille. Includes a front-mounted recessed volume control and is fully enclosed in an industrial grade steel construction.

The Bogen CS1EZ Ceiling Speaker is a pre-assembled 1-watt single-tap ceiling speaker designed for use with 70V amplifier systems. Comprised of an 8" cone speaker and 13" diameter steel ceiling grille, the CS1EZ Ceiling Speaker includes a rear-mounted screw terminal board for fast, easy installation. An accessible volume control knob is located on the faceplate. White enameled grille.

Bogen's CSD1X2 Ceiling Speaker drop-in ceiling speaker with one-piece assembly saves installation time, effort and cost. The CSD1X2 Ceiling Speaker features an 8" main cone with secondary high-frequency cone and frequency response of 110 Hz - 20 kHz. A 70V/25V 4 watt transformer & rotary switch offer 4, 2, 1, .5, .25 watt taps. A perforated grille covers the entire speaker front. Integral tile support rail and seismic attachment point.

With its fully enclosed, industrial grade steel construction, Bogen's CSD2X2CA Ceiling Tile Speaker is a drop-in ceiling speaker with one-piece assembly that saves installation time, effort and cost. The CSD2X2CA Ceiling Tile Speaker features 8" main cone with secondary high frequency cone and frequency response of 110 Hz - 20 kHz. 70V/25V 4 watt transformer & rotary switch offer 4, 2, 1, .5, .25 watt taps. Its perforated grille covers the entire speaker front and rail crossbar support.

High performance gooseneck microphone from Bogan, GCU250 Gooseneck Microphone with high end features like Cardioid pickup pattern, Electret condenser element, 250-ohm impedance, wide frequency response range of 50 Hz - 18 kHz, a low sensitivity of -65 dB +/- 3 dB etc provides reliable, efficient, clean and accurate vocal reproduction. It's slim and unobtrusive design offers smooth, noiseless and precise microphone positioning. It also features integral windscreen and an XLR connector.

The Bogen HFCS1 Speaker ceiling loudspeaker delivers superior sound in a variety of ceiling environments. The system can be easily installed in hard surfaced ceilings, suspended ceilings and new constructions. HFCS1 Speaker features 16-ohm input for non-transformer multi-speaker systems with wide dispersion coaxial driver for broad, even coverage. HFCS1 Speaker offers selectable power taps via front-mounted control with 32, 16, 8, 4, 2, and 1 options. The system comes with easy-to-install mounting system and snap-on connector for easy wiring. The accessories include a 10 ft. cable kit and tile bridge support ring.

15 watt weatherproof horn loudspeaker

KFLDS30T Wide Dispersion Horn Loudspeaker from Bogen is a 30 watt reentrant type loudspeaker designed for applications in which wide angle projection and select audio directivity is a necessity. The flare-shaped horn can be rotated to project sound in either the horizontal or vertical plane. Its sturdy, weatherproof, polycarbonate and aluminum construction is ideal for both indoor and outdoor use.