With a 36 frames per second 5 megapixel global shutter sensor, the Omron V440-F C-Mount Code Reader with WebLink 3.0 user interface is a fully programmable reader. Practically every application can use the V440-F. The Omron V440-F is optimized for decoding the following types of codes: Many codes in a single field of view (up to 400); Very small codes (0.5 mil (0.12 mm) or less, depending on the lens; codes that are visible over wide fields of vision, at great distances, or moving very quickly. A straightforward upgrade route with the same 24VDC Power and wiring accessories is ensured by the M12 I/O Connector on the Omron V440-F, which is pin-compatible with MicroHAWK V430-F readers. You may easily configure the V440-F using WebLink 3.0, a browser-based setup application.
Omron V440-F Specs