SATO GT Series Barcode Label Printer

MEDIA SPECIFICATION

Sensor Type
Reflective sensor (for use with pre-printed marks)
Adjustable see-through sensor (for die-cut label with gap)

Media Type
Roll and Fanfold: 0.002" – 0.011" (0.06 mm – 0.268 mm)

Thickness
0.011" (0.268 mm)

Outer Diameter
10.43" (265 mm)

Inner Diameter
1.5", 3" or 4" (38 mm, 76 mm or 102 mm)

Ribbon Width
1.56" - 5.04" (39.5 mm - 128 mm)

Ribbon Length 
Up to 1476' (450 m)

MEMORY

Flash ROM
6MB (Main Memory: 4MB; Font: 2MB); increase via optional extended memory cartridge

Interface Buffer
2.95MB

FONT / SYMBOLOGIES

Fonts Internal
U, S, M, WB, XU, XM, XB, XL, OUTLINE, OCR-A, OCR-B

TrueType Fonts
CG Times, CGTriumvirate, Futura, CG Palacio,  CG Century Schoolbook, CG Triumvirate Condensed, CG Univers

Barcode Symbologies
Linear: UPC-A/E, UCC/EAN128, Interleaved 2 of 5, CODE 39, CODE 128, EAN-8/13, CODE 93, RSS-14, POSTNET, NW-7, Matrix 2 of 5, MSI, Bookland  
2-Dimensional: Data Matrix, PDF417, Maxicode, Micro PDF417, Composite Symbology, QR Code, VeriCode 

INTERFACE CHARACTERISTICS

Processor
32-bit RISC

Interface Options
Wireless Ethernet (802.11b), LAN (10BASE-T/100BASE-TX Auto-Switching), Centronics Parallel, USB 1.1, RS232C, miniLAN (POP3, SMTP, HTTP), IEEE1284 (ECP Compatible), RS422/485

OPERATING CHARACTERISTICS

Power Requirements
AC100/240V [Maximum: 200VA/200W (Standby: 62VA/89W)]

Environment Operating
32º F – 104º F (0º C – 40º C), 30%-80% RH, non-condensing
Storage 23º F – 140º F (-5º C – 60º C), 30%-90% RH, non-condensing  

Regulatory Approvals
FCC Class A, U/L, CSA, CE, TÜV, CCC

Dimension
10.7" x 17.9" x 12" (271 mm x 455 mm x 305 mm)
33.0 lbs. (15.0 kg)

OPTIONAL ACCESSORIES

Label Cutter, Label Dispenser, Label Rewinder, Memory Expansion, PCMCIA Add-On Memory

OPERATIONAL FEATURES

Firmware Features
Hex Dump, Print Custom Character Design, Sequential Numbering (incl. Bar codes), Form Storage and Recall (for faster data retrieval of complex formats), SEMBL (BASIC) Interpreter   

Self Diagnosis Tools
Head Check, Paper End Detection, Ribbon Near-End/End Detection (remaining 49' - 98' detection), Open Cutter-Cover Detection, Auto Sensing for Continuous Forms, Memory Card Error Detection, Test Print