Altronix Security Products

The AL1012ULACM Power Supply-Charger converts an 115 VAC 60Hz input into eight (8) independently controlled 12VDC Fail-Safe and/or Fail-Secure outputs with a total of 10 amp continuous supply current. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an access control system, card reader, keypad, push button, PIR, etc. These units will route power to a variety of access control hardware devices including mag locks, electric strikes, magnetic door holders, etc. The outputs will operate in both Fail-Safe and/or Fail-Secure modes. The FACP Interface enables emergency egress, alarm monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eight (8) outputs.

The AL1024ULACM Power Supply-Charger converts an 115 VAC 60Hz input into eight (8) independently controlled 24VDC Fail-Safe and/or Fail-Secure outputs with a total of 10 amp continuous supply current. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. AL1024ULACM Power Supply-Charger will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. The outputs will operate in both Fail-Safe and/or Fail-Secure modes. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eight (8) outputs.

The AL125UL Power Supply-Charger is a power-limited power supply/charger that will convert 115 VAC 50/60Hz input into two individually PTC-protected 12VDC or 24VDC outputs. It is intended for use in applications requiring UL Listing for Access Control (UL294) and applications requiring an interface with fire alarm control panels. It has a filtered and electronically regulated output. It is a built-in charger for sealed lead acid or gel type batteries. Includes power supply, transformer and enclosure.

The Altronix AL175ULX Power Supply-Charger power limited power supply/charger will convert 115 VAC / 60Hz input into two individually PTC protected 12VDC or 24VDC outputs. It has a 1.75 amp continuous supply current and a class 2 Rated power limited output. The maximum charge current is 400mA. It can automatically switch over to stand-by battery when AC fails.

The AL400ULACM Power Supply-Charger converts a 115 VAC 60Hz input into eight (8) independently controlled 12VDC or 24VDC Fail-Safe and/or Fail-Secure outputs with a total of 4 amp @ 12VDC or 3 amp @ 24VDC continuous supply current. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. These units will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. The outputs will operate in both Fail-Safe and/or Fail-Secure modes.

Altronix AL400ULM Power Supply is specifically designed for use with access control systems and accessories. This unit converts a 115 VAC / 60Hz input into five (5) individually protected, class 2-rated, power limited 12VDC or 24VDC outputs. Each output will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc.

Altronix AL600ULM Power Supply-Charger multi-output access control power supply/chargers are specifically designed for use with access control systems and accessories. These units convert a 115 VAC / 60Hz input into five (5) individually protected Class 2 Rated power limited 12VDC or 24VDC outputs. Each output will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. These outputs will operate in both Fail-Safe and Fail-Secure modes.

The Altronix ALTV1224C AC and DC Wall Mount is designed to provide both 12VDC and 24 VAC outputs where a combination of both AC and DC outputs are required. It has a 7 amp total output current. ALTV1224C AC and DC Wall Mount has Sixteen (16) individually fused outputs. It provides 3.5 amp supply current @ 12VDC and 3.5 amp supply current @ 24 VAC. It has eight (8) fuse-protected outputs @ 12VDC and @ 24 VAC. Output fuses are rated @ 3.5 amp/250 VAC. Main fuses are rated at 5 amp/250 VAC. Power supply, enclosure, transformer and Camera lock are included.

Altronix ALTV1224DC CCTV Power Supply is designed to power CCTV Cameras and accessories. It will provide 12VDC or 24VDC distributed via eight (8) fused or PTC protected outputs with a total of 4 amp total supply current. It has an AC input and DC output LED indicator. This unit maintains camera synchronization.

Altronix ALTV1224DC2 Power Supply DC CCTV power supply is designed to power CCTV Cameras and accessories. It will provide 12VDC or 24VDC distributed via sixteen (16) fused or PTC protected outputs with a total of 6 amp total supply current. It has AC input and DC output LED indicators. This Unit maintains camera synchronization.